Get free lessons sent straight to your inbox

We respect your email privacy

DIY DRUZY, GEMSTONE & CHAIN NECKLACE

druzy
druzy-judy
final2_f52818e4-95f6-42a6-ba92-893314e6a3c4
materials_466f5f07-7932-4b21-b86e-5f7073e86432
Hi there!! It has been long since we did a Photo Tutorial, so today we are happy to make it again. Photo tutorials are so interesting because with the camera lens we can capture each inch of detail when creating.  So, that being said, here is our gift for you.
Hope you like it!!!
To start you will need these materials. Don’t have any? No problem. Click on each material and you will travel to the website where you can find each one of them.

 

Materials:
10. Smokey Quartz Beads, 10mm
1st Step: Insert the druzy connector through the split ring.  1er Paso: Inserte el conector por la argolla doble.
1st Step: Insert the druzy connector through the split ring.
1er Paso: Inserte el conector por la argolla doble.
2nd Step: Cut 16 inches of jewelry wire 2do Paso: Corte 16 pulgadas de alambre de joyeria
2nd Step: Cut 16 inches of jewelry wire
2do Paso: Corte 16 pulgadas de alambre de joyeria
3rd Step: Insert the jewelry wire through the jumpring. 4th Step: Place the druzy connector at the center of the wire 5th Step: Insert the wire through the gemstone. 3er Paso: Inserte el alambre por la argolla 4to Paso: Coloque el conector en el centro del alambre 5to Paso: Inserte el alambre por la piedra
3rd Step: Insert the jewelry wire through the jumpring.
4th Step: Place the druzy connector at the center of the wire
5th Step: Insert the wire through the gemstone.
3er Paso: Inserte el alambre por la argolla
4to Paso: Coloque el conector en el centro del alambre
5to Paso: Inserte el alambre por la piedra
6th & 7th Step: Place the gemstone close to the connector 8th Step: Insert 11 gemstones on each side 6to y 7mo Paso: Coloque las piedras cerca del conector 8vo Paso:Inserte 11 piedra en ambos lados
6th & 7th Step: Place the gemstone close to the connector
8th Step: Insert 11 gemstones on each side
6to y 7mo Paso: Coloque las piedras cerca del conector
8vo Paso:Inserte 11 piedra en ambos lados
9th Step: Take both wires and insert one gemstone  9no Paso: Con ambos alambres agarrados inserte una piedra
9th Step: Take both wires and insert one gemstone
9no Paso: Con ambos alambres agarrados inserte una piedra
10th Step: Place the gemstone close to the others 10mo Paso: Coloque la piedra cerca de las otras
10th Step: Place the gemstone close to the others
10mo Paso: Coloque la piedra cerca de las otras
11th Step: Insert the wire through the crimp tube 12th & 13th Step: Insert the wire through the wire protector 11er Paso: Inserte el alambre por el crimp 12do & 13er Paso: Inserte el alambre por el protector
11th Step: Insert the wire through the crimp tube
12th & 13th Step: Insert the wire through the wire protector
11er Paso: Inserte el alambre por el crimp
12do & 13er Paso: Inserte el alambre por el protector
14th Step: Place the crimp tube and the wire protector close to the gemstones 15th Step: Insert both wires through the crimp tube 16th Step: Make sure to place both, wire protector and crimp tube, close to the gemstone 14to Paso: Coloque el crimp y el protector cerca de la piedra 15to Paso: Inserte ambos alambres por el crimp 16to Paso: Asegurese de colocar el crimp y el protector cerca de la piedra
14th Step: Place the crimp tube and the wire protector close to the gemstones
15th Step: Insert both wires through the crimp tube
16th Step: Make sure to place both, wire protector and crimp tube, close to the gemstone
14to Paso: Coloque el crimp y el protector cerca de la piedra
15to Paso: Inserte ambos alambres por el crimp
16to Paso: Asegurese de colocar el crimp y el protector cerca de la piedra
17th Step: Using the flat nose pliers, flaten the crimp to secure it in place 17mo Paso: Usando las pinzas de naríz plana, aplaste el crimp para asegurarlo en su lugar Note: Make sure it's close to the gemstone before doing this step Nota: Asegurese que este cerca de la piedra antes de hacer este paso
17th Step: Using the flat nose pliers, flaten the crimp to secure it in place
17mo Paso: Usando las pinzas de naríz plana, aplaste el crimp para asegurarlo en su lugar
Note: Make sure it’s close to the gemstone before doing this step
Nota: Asegurese que este cerca de la piedra antes de hacer este paso
18th Step: This is the final result, after flattening it 18vo Paso: Este es el resultado final despues de haberlo aplanado
18th Step: This is the final result, after flattening it
18vo Paso: Este es el resultado final despues de haberlo aplanado
19th & 20th Step: Using the side cutter pliers, cut the exra wire that you will not use 21st Step: Place the cover on top of the crimp 22nd Step: Using the flat nose pliers, flaten the cover giving it a circular form 19no & 20do Paso: Usando la poinza cortadora, corte los alambres salientes que no se usarán. 21er Paso: Coloque el cubridor encima del crimp 22do Paso: Usando la pinza plana, aplane el cubridor dándole una forma circular
19th & 20th Step: Using the side cutter pliers, cut the exra wire that you will not use
21st Step: Place the cover on top of the crimp
22nd Step: Using the flat nose pliers, flaten the cover giving it a circular form
19no & 20do Paso: Usando la poinza cortadora, corte los alambres salientes que no se usarán.
21er Paso: Coloque el cubridor encima del crimp
22do Paso: Usando la pinza plana, aplane el cubridor dándole una forma circular
23rd Step: This is the final result after giving the circular form to the crimp cover 23er Paso: Este es el resultado final despues de haberle dado la forma circular al cubridor
23rd Step: This is the final result after giving the circular form to the crimp cover
23er Paso: Este es el resultado final despues de haberle dado la forma circular al cubridor
24th Step: Place the necklace on a flat table and place the chain next to it 24to Paso: Coloque el collar en una superficie plana y coloque la cadena al lado
24th Step: Place the necklace on a flat table and place the chain next to it
24to Paso: Coloque el collar en una superficie plana y coloque la cadena al lado
25th Step: Cut at least 8 inches of chain, to make the other side of the necklace 25to Paso: Corte al menos 8 pulgadas de cadena para hacer la otra parte del collar
25th Step: Cut at least 8 inches of chain, to make the other side of the necklace
25to Paso: Corte al menos 8 pulgadas de cadena para hacer la otra parte del collar
26th Step: Final result after cutting the chain 26to Paso: Resultado final luego de haber cortado la cadena
26th Step: Final result after cutting the chain
26to Paso: Resultado final luego de haber cortado la cadena
27th Step: Open one link of the chain 28th Step: Insert the chain through the split ring 27mo Paso: Abra un eslabon de la cadena 28vo Paso: Inserte la cadena por la argolla doble
27th Step: Open one link of the chain
28th Step: Insert the chain through the split ring
27mo Paso: Abra un eslabon de la cadena
28vo Paso: Inserte la cadena por la argolla doble
29th Step: Close the link. This is how it should look like. 29no Paso: Cierra el eslabon. Asi es como se debe de ver una vez hecho esto
29th Step: Close the link. This is how it should look like.
29no Paso: Cierra el eslabon. Asi es como se debe de ver una vez hecho esto
30th Step: At the end of the gemstone side, insert a split ring through the wire protector 30er Paso: Al final del lado de las piedras, inserte una argolla doble por el protector
30th Step: At the end of the gemstone side, insert a split ring through the wire protector
30er Paso: Al final del lado de las piedras, inserte una argolla doble por el protector
31st Step: Insert the lobster claw through the split ring you just placed at the gemstone side 31er Paso: Inserte un cierre por la argolla doble que colocó en el lado de las piedras
31st Step: Insert the lobster claw through the split ring you just placed at the gemstone side
31er Paso: Inserte un cierre por la argolla doble que colocó en el lado de las piedras
32nd Step: Close your necklace 32do Paso: Cierre su collar VOILA!!!!
32nd Step: Close your necklace
32do Paso: Cierre su collar
VOILA!!!!

druzydiy

final2_f52818e4-95f6-42a6-ba92-893314e6a3c4 (1)

Wow! Just loved it! This is gorgeous! Isn’t it??
The druzy are my weakness. It is like kryptonite to Superman. I feel weak at such beauty.
Do you feel the same? Let me know!
Have a blast and a creative day!!!
Shazaira
AS Team

final3_b381f15c-3ead-4240-846e-fd81857a62e9

Get free lessons sent straight to your inbox

Leave a reply